Restoration Equipment
Like us on Facebook
Our products
1200 4800 Accessories Adaptidry ADP5 ADP9 Air Movers Atomic Degreaser Benefect CAM Carpet Clamp Cleaners Containment Dehumidifiers Delmhorst Direct-It Disinfectants Dry Air Technology Electrode Extractors Filter Flood Extractor Focus Force 9 Hand Sanitiser HEPA Impact Carpet Cleaner Injectidry Injection Drying Interceptor International Ozone Lay Flat Duct Moisture Meters MSDS Odour Control Phoenix Quick Chamber R200 Stand Tempest Tramex Vaportek Ventilators Water Claw Window Adapter
Restoration Equipment
Category " Moisture Meters"
Pin type moisture meter with three scales to measure wood, gyprock and other non wood building materials.
The best-selling BD-2100 is great for measuring moisture in a variety of different building materials, including wood, concrete, drywall, EIFS, roofing, insulation, and flooring. The BD-2100 has a digital display, an adjustable alarm, and Delmhorst’s exclusive calibrated drywall scale.
Scales:
6%...
Continue Reading »
Continue Reading »
Delmhorst is proud to introduce the HT-4000, a stand-alone thermo-hygrometer for flooring installers and restoration contractors alike. The HT-4000 has the same fast acclimating RH/T sensor found in our popular TotalCheck and Navigator Pro 3-in-1 moisture meters. For contractors who prefer having separate meters to one combination meter, the HT-4000 is the perfect solution. The meter’s sensor is also...
Continue Reading »
Continue Reading »
Whether you're experienced or just starting out, you can't go wrong with the J-Lite! With J-Lite's unique LED display, you'll be in the know no matter where the job takes you. A great all-around tool for any situation!
General Features:
6% - 30% moisture content range
Microcontroller circuit for increased reliability
Integral 8mm contact pins
Connector for external electrodes
12...
Continue Reading »
Continue Reading »
Given the challenging conditions of building inspection, installation, and drying jobs, it pays to have an easy-to-use moisture meter that you can depend on. The easy-to-use 2-in-1 TechCheck was designed with simplicity in mind and helps to make even the most demanding job simple.
Pin Mode:
5% - 60% wood scale
0.1% - 50% plasterboard scale
Scan Mode:
0 - 300 numerical reference...
Continue Reading »
Continue Reading »
A three in one meter that offers scan and pin moisture modes and a thermo-hygrometer that measures ambient temperature and relative humidity and calculates specific humidity and dew point. The TotalCheck enables you to measure the relative humidity within the concrete. This procedure involves drilling a small hole in the concrete and inserting and capping a humidity sleeve flush with the floor. After...
Continue Reading »
Continue Reading »
The P-2000 is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The P-2000 is especially useful for testing paperboard, corrugated stock, and paper tubes....
Continue Reading »
Continue Reading »
A pocket sized Non-Destructive meter designed to measure the moisture content in Concrete Flooring prior to the application of floor coverings. Versatile, accurate and easy to use, this instrument allows the user to make multiple tests over a large area in the shortest possible time. It can be used in conjunction with the Tramex Hygrohood to corroborate the Non-Destructive moisture content test and to conform...
Continue Reading »
Continue Reading »
The Moisture Encounter is a Non-Destructive overall building inspection tool which has applications for numerous industries. It has many unique features that make Moisture Measurement and Evaluation fast, accurate and versatile.
Industry
Wood, flooring, Indoor Air Quality, Water Restoration, Pest Control, Inspection/Surveying.
Material
Wood, Plaster, Brick, Plasterboard (drywall), Roofing (membranes...
Continue Reading »
Continue Reading »
The BI2200 inspection meter is ideal for building or home inspections and is designed to provide comparative, relative moisture content readings for common building materials that need inspection to identify problem or potential problem moisture areas in a home or building.
Materials to Measure
Stucco, plaster, drywall, tile, shingles, roofing, linoleum, wood and more
Specific Applications
Specifically...
Continue Reading »
Continue Reading »
Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications:
Home inspector: Use on wood joists and drywall.
Paper producer: Use on curved surfaces such as cardboard and paper tubes.
Woodworker: Use on timber, poles, and veneer.
2-E is also available as the 2- ET with a tapped handle for hard to reach...
Continue Reading »
Continue Reading »
Two pins (insulated)
80mm penetration
Use on EIFS, insulation and roofs
Also available as a 21-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
Also available as a 21-E/001 with 170mm pins for EIFS
Continue Reading »
Continue Reading »
Two pins
12mm penetration
Use on plaster, masonry and wood
Will also take #496, insulated pins, 30mm penetration
Also available as a 22-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
Continue Reading »
Continue Reading »
Two pins
30mm penetration
Use to measure moisture content in wood at different levels of penetration
Ideal for shell and core tests to detect moisture gradients and to test timber with wet surfaces
Also available as type 26-ED with depth gauge
26-ES Parts List
Continue Reading »
Continue Reading »
CS-2 and CS-3 sleeve
50mm Plastic sleeve required when performing ASTM F-2170 tests on concrete. Used with the RH/T-S1 attachment included with Navigator Pro, Total Check, and HT-4000. Also available in 75mm length as CS-3. Order in packs of 20 as CS-2/20 or CS-3/20.
Continue Reading »
Continue Reading »
Extension cable that connects to the RH/T-S1, allowing you to easily view your meter’s screen while performing ASTM F-2170 tests on concrete.
Continue Reading »
Continue Reading »
Detachable relative humidity/temperature sensor that is included with Navigator Pro, Total Check, and HT-4000. Can be used to obtain ambient RH/T readings, or for performing ASTM F-2170 tests on concrete. Order individually or in packs of 5 as RH/T-S1/5.
Continue Reading »
Continue Reading »
Enables you to download stored readings from the meter to a PC via infrared linking. This software will enable you to:
Export job data to Excel.
Customize printing options.
View readings and stats in the application program.
Save and print individual or group job readings.
Customize job title.
View data in Fahrenheit or Celsius.
Append notes to each job.
Generate graphical histogram.
All...
Continue Reading »
Continue Reading »
