Restoration Equipment

The Adaptidry achieves high efficiency by dispersing intense drying power simultaneously to multiple areas around the room. Creates more pressure or vacuum suction within walls and without drilling holes, making it more effective than other vent systems Can be used in a push – pull set up When used with a HEPA air scrubber it becomes a true HEPA filtration system The ADP5 as packaged will...

Continue Reading »

The Adaptidry achieves high efficiency by dispersing intense drying power simultaneously to multiple areas around the room. Creates more pressure or vacuum suction within walls and without drilling holes, making it more effective than other vent systems Can be used in a push – pull set up When used with a HEPA air scrubber it becomes a true HEPA filtration system The ADP9 as packaged will...

Continue Reading »

Attaches to the front of most standard airmovers. Specifically developed to target areas that need high air exchange rates. Direct-It Kit supplied with: 17 Air Port Adapter 3 x 30mm hoses 15 metres long 17 x 30mm hosecuffs 17 x 16mm Wall penetrators Carry bag Manual                  

Continue Reading »

Attaches to the front of most standard airmovers. Specifically developed to target areas that need high air exchange rates. Direct-It IN Kit supplied with: 17 Air Port Adapter 3 x 30mm hoses 15 metres long 17 x 30mm hosecuffs 17 x 16mm Wall penetrators Carry bag Manual        

Continue Reading »

The Interceptor HEPA filter can be set up to process air that is going into or coming out from beneath cabinets, walls, ceilings and floors. It is important to know that HEPA filters do not make a HEPA system. Only by processing all air negatively, can a HEPA system be achieved. All air is processed before going through the blower in either negative or positive drying modes thus never contaminating...

Continue Reading »

The HP60 Package is designed specifically for floor and limited ceiling drying. The set-up is extremely quick, easy and efficient for your typical floor drying needs. Increase your capabilities to dry ceilings & walls by purchasing AH-CWK.     Specifications: Total System Airflow: 108 CFM (cubic feet per minute) Static Pressure (maximum): 60” of water lift Weight (blower...

Continue Reading »

The HP60i Package is designed specifically for drying walls and ceilings using our patented Active Hoseline. Increase your systems’ capabilities by purchasing Vac-It Panels. Specifications: Total System Airflow: 108 CFM (cubic feet per minute) Static Pressure (maximum): 60” of water lift Weight (blower unit only): 50 lbs Air Injector Hole: 3/16” for wall & 1/4” for cabinet Capacity:...

Continue Reading »

There are two types of dehumidifiers: one that has leaked, and one that is going to leak. Protect your expensive floors and the ceilings below with this dehumidifier leak pan. Made from durable polyethylene Provides 32 litres of emergency overflow protection 635mm x 635mm inside dimensions Raised feet allow for airflow    

Continue Reading »

The Silencer is made of ABS plastic and quiets the drying system by about 25%. It actually takes some of the impeller noise out in addition to attenuating the air rush sound. The Silencer attaches to either the Main AIR IN or AIR OUT Hose. Due to probable high heat output, the Silencer should be elevated from surfaces that could be damaged by heat.    

Continue Reading »